Flex Implants

The flex line of Implants are made from flexible biopolymer. They are flat, somewhat flexible, and offer improved performance over cylindrical x-series transponders.

We have live installation photos and videos for a FlexDF Installation however please take note that some of the photos may be graphic in content.

Because of this we have made a separate post which you can view Here

FlexDF Implant

flexDF [DESFire EV1 8k]

The flexDF is one of our next generation, high performance, RFID and NFC compliant transponders. The flexDF is coated in USP Class VI, ISO 10993 tested biopolymer which gives it an extremely thin profile and semi-flexible structure suitable for installation just about anywhere.

It can be read and written with devices using 13.56MHz RFID and all NFC compatible readers and writers, including USB devices and many NFC-enabled Android smartphones. They are rewritable and can store data such as your business card (vCard), medical and allergy information or emergency contact details.

FlexDF2

FlexDF Specifications

WARNING This kit definitely contains dangerous things. The flexDF transponder device has not been tested or certified by any regulatory agency for implantation or use inside the human body. Use of this device is strictly at your own risk.

  • 13.56MHz ISO14443A & NFC Type 4 DESFire EV1 RFID chip
  • 10x22x0.5mm flexible biopolymer implant package
  • Fully NFC Type 4 compliant – compatible with all NFC devices
  • ISO14443A – compatible with all ISO14443A RFID systems

FlexDF Installation

We have live installation photos and videos for a FlexDF Installation however please take note that some of the photos may be graphic in content.

Because of this we have made a separate post which you can view Here

FlexDF2 Install

Installation procedure

Please be aware if you’re wanting a professional to do the install, there is no need to buy the Flex Implant. Simply purchase a KSEC Cyborg package of your choosing and select the Cyborg Centre for your installation then book in your professional installation.

– Do not install under any gripping surface (e.g. no palm side installations) – Do not install atop or parallel to any joints (flex device are only “semi-flexible”) – Incise skin with scalpel, making 9mm wide incision – Lift/separate dermal layer using elevator tool – Remove dermal tools from installation site – Slide flexNT under skin by hand, do not use gripping tools – Suture to close wound, do not pierce flexNT with suture needle

DESFire EV1

MIFARE DESFire EV1 (MF3ICD(H) 21/41/81), a Common Criteria (EAL4+) certified product, is ideal for service providers wanting to use secure multi-application smart cards in public transport schemes, access management or closed-loop e-payment applications. It is fully complies with the requirements for fast and highly secure data transmission, flexible memory organization and interoperability with existing infrastructure. MIFARE DESFire EV1 is based on open global standards for both air interface and cryptographic methods. It is compliant to all 4 levels of ISO/IEC 14443A and uses optional ISO/IEC 7816-4 commands. Featuring an on-chip backup management system and the mutual three-pass authentication, a MIFARE DESFire EV1 card can hold up to 28 different applications and 32 files per application. The size of each file is defined at the moment of its creation, making MIFARE DESFire EV1 a truly flexible and convenient product. Additionally, an automatic anti-tear mechanism is available for all file types, which guarantees transaction-oriented data integrity. With MIFARE DESFire EV1, data transfer rates up to 848 kbit/s can be achieved, allowing fast data transmission.

The main characteristics of this device are denoted by its name “DESFire”: DES indicates the high level of security using a 3DES or AES hardware cryptographic engine for enciphering transmission data and Fire indicates its outstanding position as a fast, innovative, reliable and secure IC in the contactless proximity transaction market. Hence, MIFARE DESFire EV1 brings many benefits to end users. Cardholders can experience convenient contactless ticketing while also having the possibility to use the same device for related applications such as payment at vending machines, access control or event ticketing. In other words, the MIFARE DESFire EV1 silicon solution offers enhanced consumer-friendly system design, in combination with security and reliability.

FlexDF2 Install

FlexDF2 DESFire EV2 8kB

flexDF2 DESFire EV2 8kB NFC

The flexDF2 is one of our next generation, high performance, RFID and NFC compliant transponders. The flexDF2 is coated in USP Class VI, ISO 10993 tested biopolymer which gives it an extremely thin profile and semi-flexible structure suitable for installation just about anywhere. The DESFire EV2 8kB NFC Type 4 multi-application chip inside the flexDF2 allows large, cryptographically secured data storage. They are shipped in small sealed plastic tubes with chlorhexidine solution.

FlexDF2

flexDF2 Specifications

WARNING This kit definitely contains dangerous things. The flexDF transponder device has not been tested or certified by any regulatory agency for implantation or use inside the human body. Use of this device is strictly at your own risk.

  • 13.56MHz ISO14443A & NFC Type 4 DESFire EV2 chip
  • Huge 8kB multi-application memory space
  • 7mm x 32mm x 0.5mm flexible biopolymer package

Flex Installation

We have installation photos of a FlexDF Installation which you can view Here

Installation procedure

Wanting a professional install ? Make sure to upgrade with a KSEC Cyborg Centre installation at the check out! . Dont forget to checkout our KSEC Cyborg packages for our best deals !

– Do not install under any gripping surface (e.g. no palm side installations) – Do not install atop or parallel to any joints (flex device are only “semi-flexible”) – Incise skin with scalpel, making 9mm wide incision – Lift/separate dermal layer using elevator tool – Remove dermal tools from installation site – Slide flexNT under skin by hand, do not use gripping tools – Suture to close wound, do not pierce flexNT with suture needle

The DESFire EV2 chip

  • 13.56MHz ISO14443A & NFC Type 4 DESFire EV2 RFID chipset
  • Full datasheet for the NXP DESFire EV2 RFID/NFC chip
  • 7 byte UID and 8K bytes of user read/write memory
  • 25 year data retention. Rated for 500k writes per memory block.
  • Encased in 3mm by 13mm bioglass with non-toxic epoxy
  • Pre-tested and pre-loaded into sterile injection assembly
  • No “anti-migration” coating means easy removal/replacement

DESFire EV2 chip specifications include

  • Common Criteria certification: EAL5+ (Hardware and Software)
  • Optional RANDOM UID for enhance security and privacy
  • Mutual three pass authentication
  • Mutual authentication according to ISO/IEC 7816-4
  • Flexible keys: 1 card master key and up to 14 keys per application
  • Hardware DES using 56/112/168 bit keys featuring key version
  • Hardware AES using 128-bit keys featuring key version
  • Data authenticity by 8 byte CMAC
  • Data encryption on RF-channel
  • Authentication on application level
  • Hardware exception sensors
  • Self-securing file system
  • Backward compatibility to MF3ICD40: 4 byte MAC, CRC 16

ISO/IEC 7816 features

  • File structure (selection by File ID or DF name)
  • APDU message structure
  • APDU wrapper for MIFARE DESFire native commands
  • INS code ‘A4’ for SELECT FILE
  • INS code ‘B0’ for READ BINARY
  • INS code ‘D6’ for UPDATE BINARY
  • INS code ‘B2’ for READ RECORDS
  • INS code ‘E2’ for APPEND RECORD
  • INS code ’84’ for GET CHALLENGE
  • INS code ’88’ for INTERNAL AUTHENTICATE
  • INS code ’82’ for EXTERNAL AUTHENTICATE

Interesting DESFire EV2 features

FlexNT Implant

FlexNT Implant

FlexNT NFC Tag [NTAG216]

The FlexNT is one of our next generation, high performance, RFID and NFC compliant transponders. The flexNT is coated in USP Class VI, ISO 10993 tested biopolymer which gives it an extremely thin profile and flexible structure suitable for installation just about anywhere.

The FlexNT can be read and written to by many types of ISO14443A based RFID systems, and all NFC compliant reader/writer devices including USB devices and NFC compatible mobile phones.

It can be read and written with devices using 13.56MHz RFID and all NFC compatible readers & writers, including USB devices and many NFC-enabled Android smartphones. They are rewritable and can store data such as your business card (vCard), medical and allergy information or emergency contact details.

FlexNT Implant Finger

FlexNT Specifications

WARNING This kit definitely contains dangerous things. The flexNT transponder has not been tested or certified by any regulatory agency for implantation or use inside the human body. Use of this device is strictly at your own risk.

  • 13.56MHz ISO14443A & NFC Type 2 compliant NTAG216 RFID chipset
  • 8x22x0.4mm flexible biopolymer package
  • Fully NFC Type 2 compliant – compatible with all NFC devices
  • ISO14443A – compatible with all ISO14443A RFID systems

Installation procedure

Please be aware if you’re wanting a professional to do the install, there is no need to buy the Flex Implant. Simply purchase a KSEC Cyborg package of your choosing and select the Cyborg Centre for your installation then book in your professional installation.

– Do not install under any gripping surface (e.g. no palm side installations) – Do not install atop or parallel to any joints (flex device are only “semi-flexible”) – Incise skin with scalpel, making 9mm wide incision – Lift/separate dermal layer using elevator tool – Remove dermal tools from installation site – Slide flexNT under skin by hand, do not use gripping tools – Suture to close wound, do not pierce flexNT with suture needle

FlexNT vs xNT Performance



Things to know about the FlexNT

– The biopolymer is ISO 10993 and USP Class IV tested and certified, however the final product has not been tested post-processing, meaning material changes during processing could render the final product unsafe in some way. Testing is planned for later, however beta testers have had the flexNT since April 2016 and report no issues. Dangerous Things founder and CEO Amal Graafstra underwent the first installation of a flex line device (a flexNT beta) on 03/02/2016 above the second metacarpal of the ring finger of his left hand. So far the installation has healed excellently and there are no signs of rejection or irritation at the installation site.

– There is no “preferred” location for installation of a flexNT. Customers are free to install the flexNT into any area of the body their installation professional is comfortable with, as long as it is in the fascia layer between dermis and muscle tissue. Even though we use images which suggest installation above the second metacarpal of one of the fingers, it is not an ideal location for such a device. Fingers are filled with tendons, nerve bundles, and very important things all packed into a very tight space. We urge you to think about easier locations like the back of the hand or in the arm/wrist.

Usages

Check out Post here about the FlexNT NFC Tag usages

TeslaFlex “Key Card” Implant - Preorder!

TeslaFlex

We converted a Tesla Model 3 key card into a flex implant! Never lose your Tesla car key again with the TeslaFlex!

FlexDF2

More Details

We took a Tesla Model 3 key card and converted it into a 7mm x 32mm x 0.5mm flexible biopolymer implant – the TeslaFlex! It’s coated in USP Class VI, ISO 10993 tested biopolymer which gives it an extremely thin profile and semi-flexible structure suitable for installation just about anywhere. They are shipped in small sealed plastic tubes with chlorhexidine solution.

WARNING This kit definitely contains dangerous things. The flexDF transponder device has not been tested or certified by any regulatory agency for implantation or use inside the human body. Use of this device is strictly at your own risk.

Flex Installation

We have installation photos of a FlexDF Installation which you can view Here

Installation procedure

Wanting a professional install ? Make sure to upgrade with a KSEC Cyborg Centre installation at the check out! . Dont forget to checkout our KSEC Cyborg packages for our best deals !

– Do not install under any gripping surface (e.g. no palm side installations) – Do not install atop or parallel to any joints (flex device are only “semi-flexible”) – Incise skin with scalpel, making 9mm wide incision – Lift/separate dermal layer using elevator tool – Remove dermal tools from installation site – Slide flexNT under skin by hand, do not use gripping tools – Suture to close wound, do not pierce flexNT with suture needle