flexMT (Magic 1k + T5577)

The flexMT is a monster built for performance, and a little bit of flash 😉

  • 0.4mm thin biopolymer, 33mm total diameter
  • 30mm Magic 1k gen1a ISO14443A chip
  • Magic 1k has 2″ (50mm) range with ACR122U
  • 15mm T5577 125kHz LF emulator chip
  • T5577 has 2.75″ (70mm) with RedBee LF reader
  • Optional 13.56MHz blinky lights !!!

Please be aware DT are making these as they are ordered, on a first come first served basis. For the latest updates please refer to the official product forum post: https://forum.dangerousthings.com/t/the-flexmt-is-available-for-pre-order/7306


  • RFID Access Cards

    Need to test RFID compatibility or clone access cards ?
    Choose from a wide range of RFID cards perfect for any situation.

    • £
    • 21.99 £
    • 3.99 £
    • 4.49 £
    • 3.99 £
    • 4.49 £
    • 1.99 £
    • 1.99 £
    • 1.99 £
    • 1.5 £
    • 106.99 £
    • 35.99 £
    • 35.99 £
    • 35.99 £

  • Accessories
    • 0 £

    Reset Addon Options

Cyborg Packages Partner Map X-Series FAQ

KSEC Cyborg Banner


More Details

WARNING This kit definitely contains dangerous things. The flexMT transponder has not been tested or certified by any regulatory agency for implantation or use inside the human body. Use of this device is strictly at your own risk.

The flexMT is a jumbo size flex combination of our easily injectable 3mm diameter xM1 magic 1k and our 2mm injectable xEM T5577 chips. Now you can fully program the ID (serial number) and application memory in both ISO14443A and 125kHz chips a single implantable device with excellent performance and blinky lights too!

Professional installation notes

Installation of a flexMT device should always be done by a professional. We do not presume to know better than your professional installer what the correct installation method for your body and desired implant location might be. Always defer to your installation professional’s opinion on placement and installation procedure.

  • Do not install under any gripping surface (e.g. no palm side installations)
  • Do not install atop or parallel to any joints (flex devices are only “semi-flexible”)
  • The flexMT’s construction gives the final product a slight warping effect. This can be used to your advantage by encouraging the flexMT to conform more easily to modest curves than a perfectly flat device.

For more information about the Magic 1k gen1a chip inside the flexMT, please read the xM1 product page. For more information about the T5577 emulator chip inside the flexMT, please read the xEM product page.

Shipping & Packaging

  • Free shipping on £50+ UK orders and £100+ Worldwide
  • Free priority shipping on all orders above £200
  • Our products are dispatched from the UK
  • We provide worldwide shipping